Product Standard |
G-Type Combinational Glass Lid |
Size:14cm-40cm |
Texture of Glass:4mm&5mmWhite,Green,Blue and Tawney Float Glass |
Texture of Steel Ring:SUS201,SUS202,SUS304 |
It is mainly used for round cookware(We can make the lids as you design.) |
Production Charts
1 | C-Type Round Lid | Normal C-Type Round Lid |
Wide Rim C-Type Round Lid | ||
2 | G-Type Round Lid | Normal G-Type Round Lid |
High Dome G-Type Round Lid | ||
G-Type Combinational Glass Lid | ||
3 | H-Type Round Lid | H-Type Flat-Steel Glass Lid |
Wide Rim H-Type Round Lid | ||
4 | Y-Type Round Lid | Wide Rim Y-Type Round Lid |
5 | L-Type Round Lid | Normal L-Type Round Lid |
L-Type Normal Printing-ink Glass Lid | ||
High Dome L-Type Round Lid | ||
L-Type Combinational Glass Lid | ||
6 | T-Type Round Lid | Normal T-Type Round Lid |
T-Type Seamless Glass Lid | ||
T-Type Normal Printing-ink Glass Lid | ||
T-Type Tempered Glass Lid with Multi-Channel Steam Vent | ||
7 | GJ-Type Round Lid | Glass Lid with Silicone Ring |
8 | Oval Lid | C-Type Oval Lid |
G-Type Oval Lid | ||
Oval Lid with Silicone Ring | ||
9 | Rectangular Lid | C-Type Square Lid |
C-Type Square Lid | ||
Square Glass Lid with Silicone Ring | ||
10 | Version with Glass Window |
Packaging & Shipping:
Packing details: Paper card or color box (depensd on customer's request)
Loading port : Wuhan China
Delivery Time: 15days
Features:
1:high strengthen impacting
2.heat stabilization can reach 200 temperature
3.brightness on the surface
4.using float glass as material
5.hard to break,easy to use
Test for quality control:
1.Heat test: put the glass lid into oven at 200 °C for 60 minutes, remove
immediately into water at room's temperature , the lid should not be
broken or cracked.
2.Impact resistance test: drop the 225g ball from the height of 1.5 meter in free fall
and impact on the lid at 1/3 radius, so after three times, damage or cracks are not allowed.
3.Pressure test:use 120 grit abrasive paper scraping on the back side of the lid for 15 times, then check after 24 hours,the lid should not be broken or cracked.and impact on the lid at 1/3 radius, so after three times, damage or cracks are not allowed.
4.Dishwasher test: washed by the dishwasher for 50 times, the lid should not turn to be yellow or dark, and without loosing and deformation on the stainless steel rim.